Current Page — FAQ
 Gasket Types
 Gasket Setting

Possfailureible causes gasket application
 

 

 

 

 

 

 

 

Gasket Setting

1 ) Apply lubricant uniformly to all thread, nut and washer load-bearing surface
   
2 ) Never use any compound to stick the gasket to the flange
   
3 ) Always torque with proper tools
   
4 ) Torque bolts in a cross bolt tightening pattern
   
5 ) Never retorque elastomer based gasket after exposition to elevated emperatures
   
6 ) Always use the bolts specified in the standard
   
7 ) Use all the bolts of identical material
   
8 ) Never reuse bolts
   
9 ) Always use washers
   
10 ) Install the thinnest possible gasket
   
11 ) Never cut the gasket against the flange
   
12 ) Store the sheets horizontally in a cool and dry place. Avoid direct sunlight
   

| Copyright(C) 2008 SEALTEX CO., LTD  上海索拓密封材料有限公司 版权所有 |